Implanting Success

Optically Clear, Medical Grade UV Epoxy
Effectively used in medical device manufacturing applications, Master Bond UV10TKMed is a higher viscosity UV system for bonding, sealing, and coating that passes USP Class VI testing. It also meets the requirements of ISO 10993-5 for cytotoxicity.

This one-part system is optically clear and has a very high glass transition temperature that exceeds 140°C. It resists repeated sterilization, including radiation, ethylene oxide, chemical sterilants, and especially autoclaving. UV10TKMed’s service temperature ranges from -60°F to +450°F. It combines dimensional stability with low shrinkage upon curing. The system is 100% reactive and does not contain any solvents or diluents.

Quickly

• Cures readily in 20 to 30 seconds
• Rate of cure depends upon:
  • Distance from the light source
  • Thickness of the section
  • Intensity of the light source
• System can cure in sections up to 1/4"
• UV10TKMed is not oxygen inhibited
• UV10TKMed does not require any special treatment
• Bonds well to glass, composites, surface treated metals, and plastics
• UV10TKMed can also be used as a coating or sealant
• UV10TKMed is a superlative electrical insulator
• Shelf life of 6 months in original, unopened containers with no exposure to light
• Available in syringe applicators, 1/2 pint, pint, quart, gallon, and 5 gallon containers

Learn more about Master Bond’s high temperature resistant adhesives at http://bit.ly/1aLLbbw.

Master Bond Inc.
Hackensack, N.J.
www.masterbond.com

Concentric Clamping for Ultimate Tool Performance
The TENDO Platinum toolholder, an advanced technology toolholder, delivers durability, user friendliness, and precision for almost any reaming, drilling, and milling application. Boasting im­proved brazing technology, TENDO Platinum is produced using a unique brazing and hardening process all in the same cycle, allowing for the most rigid and durable tool clamping available.

TENDO Platinum is balanced to G2.5 at 25,000rpm, offers strong vibration dampening, and delivers precise runout accuracy of less than 0.003mm (0.0001") at 2.5 x clamping diameter. The TENDO Platinum protects the machine spindle and the cutting tool from wear and damage.

Visit http://bit.ly/12HuLvP to find a toolholder that is suited to address your manufacturing challenges.

Schunk
Morrisville, N.C.
www.schunk.com