Cover Shots

Highly Flexible Micromachining System
The IX-255 UV Laser Micromachining System is for multi-purpose, R&D, and small-scale production applications. The system, configured with a beam energy density up to 25J/cm2, is for applications such as drilling ceramic materials. It can also be programmed to lower energy density for large-field exposures. A third configuration allows the programmable selection of beam shapes for general-purpose patterning, cutting, and machining of blind features.

Get a detailed brochure on the IX-255 system at http://bit.ly/11jVcaK.

Main Features:

• Pre-set configurations
• Selectable beam shapes for automated, complex micromachining
• Precision stages with < 3µm motion control accuracy
• Dual magnification, vision system with sub-micron part alignment

Advanced Applications:

• Micro-drilling
• Thin-film removal
• Dicing
• Annealing capabilities

IPG Photonics Corp.
Oxford, Mass.
www.ipgphotonics.com/micro_industrial.htm

High Power DC Motor Series
The Faulhaber high power 0816…SR Series DC-Micro Motors, based on the Faulhaber ironless rotor winding, deliver consistent performance in a compact 8mm diameter with continuous torque up to 0.7mNm and a stall torque of 1.2mNm. Weighing in at just 4.5g, the 0816…SR is for applications where light weight and high torque are essential. These coreless DC Micro Motors are highly efficient by design and ideal for battery-operated device integration.

Quick Look
Various standard nominal voltages available: 3V, 6V, 9V, and 12V Speed/ torque curve: 11,000rpm/mNm Combination with optical or magnetic encoders and precision gearheads

Get the datasheet with all pertinent details about the series at http://bit.ly/12R6V3p.

MICROMO
Clearwater, Fla.
www.micromo.com
 

3-Flute End Mills
Series 33 high performance 3-flute end mills for difficult materials and challenging applications are available with a corner radius, and are ideal for aggressive ramping, pocketing, and slotting of materials such as stainless steel, titanium, and Inconel. The open structure at the axial end accommodates material flow and load reduction during machining operations.

Features:

• Stepped core design – Provides optimal chip control and rigidity when the flute is completely engaged
• Unique variable geometry – Engineered variable helix and pitch configuration offer chatter and vibration suppression
• Symmetrical end gashing – Superior balance combined with a high level of strength and ramping capabilities

SGS Tool Co.
Munroe Falls, Ohio
https://www.kyocera-sgstool.com/