Low-cost belt-drive actuator

MXB electric belt-drive actuators include solid bearing load-carrying designs for harsh environments. The trapezoidal solid bearing provides a rigid, long-lasting bearing system able to operate in environments that roller bearings cannot withstand. With loads up to 520 lb (235kg), speeds up to 100ips (2.54m/sec) and strokes up to 230" (5.8m), the MXB-S belt-drive actuators offer a solution for light-to-moderate loading applications requiring high duty cycle and high speeds with long strokes. The MXB-S actuator can withstand light washdown.

The MXB-S is available in six body sizes with in-line motor mounts as well as reverse parallel mounts with 3:1 timing belt reductions. When paired with the ACS servo or stepper EtherNet/IP-enabled drive and motor package, or with third-party motor and drive using the Your Motor Here program, the MXB-S actuator can integrate into many applications.

Tolomatic

www.tolomatic.com

Nanopositioning systems

Advanced nanopositioning controllers are geared toward original equipment manufacturer (OEM) production automation, metrology systems, scientific research, and lab automation applications. On-hand availability and rapid shipment enable quick integration without long lead and planning times.

Piezo motion is used for applications requiring any combination of:

• Fast response
• High precision
• High force
• Long life
• Maintenance, lubricant free
• Compact dimensions
• Non-magnetic
• UHV compatible

PI (Physik Instrumente) LP

www.pi-usa.us

Board-mount 15W to 60W AC-DC power supplies

TDK-Lambda KMS-A 15W to 60W board-mount AC-DC medical and ITE-certified power supplies are capable of starting at -40°C. The convection-cooled units will operate in ambient temperatures up to 80°C and are rated for full load from -30°C to 50°C.

The encapsulated series is comprised of three power levels: 15W, 30W, and 60W and five output voltages: 5V, 9V, 12V, 15V, and 24V. The 15W models measure 52.5mm x 27.5mm x 23.5mm, the 30W 64.0mm x 45.0mm x 23.5mm and the 60W models 89.0mm x 63.5mm x 27.0mm. Rated for Class II operation, the KMS-A requires no earth ground connection.

The KMS-A series accepts an input voltage of 90VAC to 264VAC and requires no external input filtering components. Efficiencies are up to 89% and have an off-load power draw of <0.1W for the KMS15A, <0.15W for the KMS30A, and <0.3W for the KMS60A.

Input-to-output isolation is 4kVAC, 2 x MOPPs, with all models certified to UL/CSA/IEC/EN 60950-1, ANSI/AAMI ES 60601-1, IEC/EN 60601-1, and carrying the CE mark for the low voltage and RoHS2 directives.

TDK-Lambda Americas

https://www.us.lambda.tdk.com/