Metal Cutting

CNC Productivity Innovations
For advanced smooth and accurate simultaneous 5-axis high-speed machining, Fanuc’s 30i-B/31i-B5 CNCs boast the new High-Speed Smooth TCP with new fairing technology. This drastically reduces cycle times while improving part accuracy and quality. For complex machining processes, this is the ideal combination of Fanuc’s reliability and modern high speed 5-axis features. In addition, Fanuc’s Series 30i-Model B controls (this includes 30i-B, 31i-B, 31i-B5, 32i-B, & 35i-B) offers an enhanced high-speed and large capacity, multi-path PMC delivering large-scale sequence control with a maximum of five concurrent independent ladders. Execution of common instructions is over two-and-one-half times faster than previous generation, with additional capability of high speed module executing every 1ms.

Improved operability is also achieved with the Series 30i-B CNCs using the handheld operator’s unit iPendant for CNC. The Fanuc Series 30i-B controls deliver performance and reliability.

Also on display will be Fanuc’s Power Motion i–Model A CNC; Fanuc’s new iPendant for CNC; and highlights of comprehensive industry solutions to meet the strictest requirements a range of industries.

IMTS Booth S-8919
Fanuc FA America
Hoffman Estates, IL
www.fanucfa.com

Swiss-Type Lathe
and Bar Machines
The Cincom M432VIII Swiss-type lathe and Miyano BNA-42MSY multi-tasking bar machine will be exhibited along with the Cincom and Miyano turning machines and accessories that deliver manufacturing solutions in 2mm to 64mm bar applications. The M432VIII incorporates a third Y-axis on the back tool post and a B-axis with rotary tools on the gang toolpost. The B-axis locates on the slant axis in reference to the Y-axis direction. When drilling angular holes on a conventional machine, an adjustable angle spindle is required. However, with this machine, a B-axis incorporating rotary tools can be used to change the angle, continuously, allowing machining of multiple angular holes in a single set up. The BNA-42MSY features two spindles, Y-axis-equipped turret, and an X2 axis on the back spindle.

IMTS Booth S-9419
Marubeni Citizen-Cincom Inc.
Allendale, NJ
www.marucit.com

Trunnion Horizontal CNC Machines
HBZ Trunnion performs 5-axis machining of aluminium, steel, and
titanium on table diameters ranging from 800mm, 1,200mm, and 1,600mm. It is suitable for die- and moldapplications. This machine features spindles (max. 125kW), up to 390Nm torque (up to 390Nm), and operates at speeds to 30,000rpm. Due to the horizontally-positioned spindle, chips and coolants directly drop down from the workpiece and do not stay in deep pockets.

IMTS Booth S-9136
Handtmann CNC Technologies Inc.
East Dundee, IL
www.handtmanncnc.com

High-Speed Milling
Suitable for micro- and macro-machining applications, the HPM 450U has a torque rotary/tilt table for unencumbered, interference-free, 5-axis machining, offering efficient spindle options. It easily adapts to suit a variety of individual requirements, from drilling to machining complex 5-sided parts, and simultaneous 5-axis machining processes. The HSM 400U LP provides 5-axis machining. It achieves speeds up to 250rpm on the rotational axis and up to 150rpm on the swivel axis, with a B-axis swivel range of 220°. The HSM 400U LP also uses a liquid-cooled, linear direct-drive motor technology to allow for short setting times and rigidity of the attitude control.

IMTS Booth S-8754, E-5127
GF AgieCharmilles
Lincolnshire, IL
www.gfac.com

Lathes
The 35-tool, 9-axis Cyclone-52 BY2 multitasking 2" CNC lathe features 18 driven tools, including 12 tools with B-axis capability. There is a separate Y-axis for both the main and the sub-spindle to ensure that a tool with the right capabilities available when needed. The 11-axis Cyclone-52 3TMY machine can machine complex parts with 48 tools from the three 16-station high-speed tool turrets. Both upper turrets feature Y-axis capability. The 6,000rpm 2" bar main and sub-spindle are capable of working simultaneously with all three turrets cutting. The 30hp GT - 3060 CNC Oil Country lathe has a 10" bore, 30" swing, and front and rear A2-15 chuck mounts. This machine is available in center distances of 60" to 160" as well as the Fagor 8065 touch-screen CNC control.

IMTS Booth S-9371
Ganesh Machinery Inc.
Chatsworth, CA
www.ganeshmachinery.com

CNC Lathe
The HL-35 DMSY CNC lathe is designed for high-speed, precision turning and milling applications. It features the Durga 23-station twin-disk turret, a C-axis, Y-axis and sub spindle for increased productivity. The Durga turret provides quick set up times and fast chip-to-chip tool changes. This twin-disk turret allows for 12 tools for OD turning and 11 tools for ID turning. All ID tool stations can be equipped with radial and axial power driven tools for maximum turning and milling versatility. The sub-spindle is equipped with an 8" hydraulic chuck, 20hp, 5,000rpm spindle to accommodate a variety of parts. The main spindle is equipped with a 10" hydraulic chuck, 25hp, 4,000rpm spindle with 2.95" bar capacity for greater machining capabilities. Standard accessories include a chip conveyor, tool presetter, and parts catcher.

IMTS Booth S-8021
Femco Inc.
Garden Grove, CA
www.femcousa.com

Range Of Machining Technologies AND Process Solutions
Application and system engineers will be on hand to help attendees develop manufacturing solutions that can reduce part cycle times, improve quality, and build overall confidence in their ability to bid on new jobs and win. With a combination of high-performance machine technologies and industry-leading engineering services, Makino enables manufacturers to compete globally and succeed. During IMTS, introduced will be a number of new medical machining technologies, including 4-axis and 5-axis vertical and horizontal machining centers, ultra-precision machining centers, and new wire EDM technologies. Makino’s application engineers will be available to answer attendee questions, review part prints, and discuss topics. Medical machining demonstrations will include a new automated flexible manufacturing system featuring horizontal milling of high-precision medical orthopedic implants. Additional demonstrations will include titanium dental bridge machining, micro-medical mold manufacturing and EDMing of high-precision medical device components.

IMTS Booth S-8700
Makino Inc.
Mason, OH
www.makino.com/imts

Turning Center for Small Precision Parts
The SF-25 Turn Mill Lathe is composed of a 24-station tool changer and 10-station turret with up to three tools in each station, for speed and precision in the production of complex and odd-shaped parts. The SF-25 is a 25mm capacity fixed-head turn mill center, which is intended for the manufacturing of complicated odd-shaped parts in medical and other industries. The machine is equipped with a high-speed spindle, 20,000rpm to accommodate small tools.

IMTS Booth S-8559
Star CNC Machine Tool Corp.
Roslyn Heights, NY
www.starcnc.com

Loading System
The RLS 800 rotary loading system complements the existing PHS linear pallet handling system line. The new system is for users who are looking for a cost-effective entry to high-efficiency production for one to two machines. The system enables spindle utilization of more than 90% and is available in two sizes. The pallet storage capacity of the new RLS is ideal for automation of up to two machining centers combined with a very small footprint. The layout of manipulator and storage racks makes it possible to achieve up to 24 pallet storage locations in a minimal area.

If production requires a larger number of pallets or the storage capacity is not adequate, the storage capacity can be increased with the Liebherr RST storage tower. It is installed on a rotary module and docked to the system in exchange of two shelf units. Up to 18 storage locations per tower can be added with a minimal footprint. The storage tower can also be used to link two individual RLS units to form one combined system.

IMTS Booth S-8974
Liebherr Automation Systems Co.
Saline, MI
www.liebherr.com

Turning Machine
The compact MW50GT turning machine is an automated CNC turning center for parts measuring 50mm (2") x 50mm (2") and features twin horizontal spindles and twin four-station tool blocks. Its twin 3-axis CNC gantry loader offers greater versatility in automation, high productivity with minimum production time, and drastical reductions in cycle time. The 3-axis CNC gantry loader allows for quick loading and unloading at stocker systems, conveyors, post-process gages and post-process systems. Compared to single-spindle machines, the MW50GT’s compact design saves space in production set up for more efficient line planning.

IMTS Booth S-8874
Murata Machinery USA Inc.
Machine Tools Div. – Turning
Charlotte, NC
www.muratec-usa.com

Production Machining Cell
RoboDrill Med Cell is a pre-engineered, integrated production-machining cell, which automates loading and unloading of medical device parts. The reliable Fanuc RoboDrill Machining Center is at the core of the system. The Med Cell has 5-axis machining capability and is suitable for medical machining applications, including short-run production of parts in a variety of materials from stainless steel to titanium. Featuring an integrated macro chuck, the Med Cell enables different parts to be mounted on the same universal chuck base for maximum versatility.

IMTS Booth S-9119
Methods Machine Tools Inc.
Sudbury, MA
www.methodsmachine.com

Horizontal CNC Lathe
The Vturn-A26YCV features a direct-drive spindle and a star-type turret for milling application with second ballscrew inside the turret carriage. The milling operation, along the vertical direction, moves at a travel rate of ±2.17" in the Y-axis. A Fanuc a22i motor is installed to deliver 6hp/30ft/lbf milling power up to 4,000rpm along the main spindle and/or sub-spindle. The company will also be exhibiting its Vcenter-A110 vertical machining center and the Vturn-V560 VTL machine.

IMTS Booth S-9163
Fortune Int’l Inc.
Somerset, NJ
www.fortune-cnc.com

High-Speed Machining Center
The CNC C 22 U dynamic high-speed machining center features the PW 150 pallet changer, designed for the workpiece dimensions of the C 22 and can transport weights up to 250kg including pallet. The automated system consists of an NC-controlled drive unit and a turning unit with double gripper. Both units are positioned compactly on the left, next to the machine, and allow free access to the working area. The pallet changer does not have to be dismantled for transportation it does not require a floor mounting, and is easily adaptable. The key feature of the pallet changer is the double gripper, which moves, simultaneously, two pallets with 150kg transport weight each, in or out or, for a one-sided application, one pallet with up to 250kg transport weight. The maximum workpiece cube has a diameter of 400mm with a maximum workpiece height of 370mm.

IMTS Booth S-8450
Hermle Machine Co.
Franklin, WI
www.hermlemachine.com

Automatic Surface Grinder
The FSG-2040ADIII Series includes a PLC controller that provides a grind cycle with rough grinding, fine grinding, spark-out passes, and an automatic over-wheel dresser with compensation, which can be added to automate the grind process. After the cycle is finished, the table will park either left or right of the saddle and at the front to facilitate unloading and loading. The wheel head can also be set to return to the start position or to park at a reference point. Once the cycle is started, the wheel head will move rapidly to the start point and repeat the grind cycle. If material is required to be removed from both sides, flip over can be selected so that the wheel head position is at the finish grind height, which will start grinding immediately without touching off. The automatic grind feature consists of rough and fine grinding cycles, switching from rough grinding down-feed increments to fine grinding down-feed increments at preset points during the cycle. This crossfeed also switches from a rough to fine cross-feed increment, which results in a finer surface finish and finer accuracy.

IMTS Booth S-9066
Chevalier Machinery Inc.
Santa Fe Springs, CA
www.chevalierusa.com

Precision Machining
The Vertical Center Nexus Compact, which is available in 3- and 5-axis versions, meets lean manufacturing standards through the use of a small-footprint, high-speed machine that offers precision when creating high-quality parts. Additionally, the machine’s Mazatrol Matrix 2 CNC control and 5-axis machining capabilities shorten design-to-market time, allowing doctors to fulfill, quickly, the needs of their patients. Within the Matrix 2 CNC control are enhanced hardware and software functionalities that make the control easy to use while delivering high accuracy and increased productivity. Control hardware performance is much faster with higher processing speeds for small increment operation, and a 5-axis spline interpolation function included in the control’s software provides smooth toolpaths from long block-by-block programs, easy tool vector control, and shorter cycle times, as well as superior five-axis surface finishes.

IMTS Booth S-8300
Mazak Corp.
Florence, KY
www.mazakusa.com

Automatic Lathe
The TRAUB TNL18 sliding/fixed headstock automatic lathe is available with seven linear axes and an extra B-axis. With the additional B-axis in the upper tool carrier, which can pivot 100°, complex parts and complicated contour elements that also require additional operations such as milling, drilling, lateral drilling, or threading may be machined at any angular position. In addition, the eight-position turret with the double-driven toolholder per position capability provides additional flexibility. Setting up angle-adjustable toolholders is no longer necessary, reducing setup time. The omission of angle-adjustable toolholders creates more stable machining conditions in the machine system. Due to additional operations in any angle positions, workpieces can be produced more flexibly and efficiently in a single setup.

IMTS Booth S-8450
INDEX Corp
Noblesville, IN
www.index-usa.com

PKM Machining Center
ICON Technologies’ Tripod 700S Powerflex is a modular 6-axis Parallel Kinematics Machining (PKM) Center. PKM technology means that the motions in X, Y, and Z are performed by three parallel axes that provides good stiffness and accuracy with a maintained flexibility and cutting area. It combines the flexibility and envelope of a robot but with the accuracy and stiffness of traditional machine tools. The Tripod Powerflex does not notice any differences between a perpendicular hole or surface compared to a compound angle, making it suitable for complex machining. The work envelope is 800mm x 800mm x 400mm.

IMTS Booth S-8348
Hydromat Inc.
St. Louis, MO
www.hydromat.com

Turning Center Delivers Mirror Finishes
For parts up to 29.5” diam. x 128” long, turned quickly, with mirror finishes and micron precision is Doosan’s Puma 700 turning center. In addition, the Puma 700LY adds Y-axis motion, enabling it to machine a greater range of products in a single chucking. Starting with its generous A1-15 spindle with a 6.5” draw tube, ID perfect alignment and center height are achieved by mounting the headstock on the same way surface as the tailstock. Driving the spindle is a 60hp motor that transmits power through three gear ranges, ensuring optimal power at speeds from 65rpm to its maximum 1,500rpm, and generating low-end torque up to 4,873ft/lb. Tools cut deep into hard-to-machine materials, doing in a single pass what many others do in three or more.

IMTS Booth S-8100
Doosan Machine Tools
Pine Brook, NJ
www.doosaninfracore.com/machinetools

Palletized Conveyor System
The PS800 palletized conveyor system features robotic loading and unloading of a machining center. This automated system uses Flow technology, which uses one piece per pallet to maintain continuous material flow and maximize uptime and flexible layouts that connect all operations in the process. The PS800 automates all machining operations with one loading device per machine and understands the Takt time for each operation, using it to maximize cycle time.

IMTS Booth S-8966
EWAB Engineering
Libertyville, IL
www.ewab.com

Short-Loader
Bar Feeder
Alpha SL65 S is a short loader for bars with diameters from ¼" to 2-5/8" (6mm to 67mm) and lengths from 12" to 61" (300mm to 1,550mm, not to exceed the overall spindle length). The Alpha SL65 S includes the exclusive LNS Soft Touch loading system using a servomotor that automatically adjusts speed, torque, acceleration and deceleration to allow travel and positioning at high speeds. It automatically feeds to length without losing contact between the pusher and the bar stock. This bar feeder is equipped with three pushers (6mm, 12mm, and 19mm), a self-contained 26" (660mm) magazine tray that allows for long production runs and unattended operation, and standard X-axis and optional Z-axis retraction for E-Z change spindle liners changeovers and machine maintenance. Partial changeovers take less than five minutes.

IMTS Booth S-8586
LNS America Inc.
Cincinnati, OH
www.lns-america.com

Win-Turret Lathe
The CSD-300R is a twin spindle, twin turret lathe that can achieve turning, milling, and drilling in 21.2 seconds from start to finish. It has a Fuji-engineered hydraulic clamping robot loader with optimal robot paths. Heavy parts up to 7.87" x 4" (5kg + 5kg) are seated and transferred. Robot alignment to spindle centerline is achieved with the CSD-300R’s robot control. The CSD-300R turret achieves speeds of 0.26 sec/index. Dual zero 100mm spindles (A2-6) are equipped with 15hp/20hp spindle motors. The machine’s Z- and X-axis boxways (with no quill for the Z-axis movement) allow for rigidity and accuracy. The large capacity CSD-400 version of this twin spindle lathe will also be on display at IMTS.

IMTS Booth S-9059
Fuji Machine America Corp.
Vernon Hills, IL
www.fujimachine.com

Five-Axis Machining Center
The 5X-410 machining center provides five-face/5-axis machining. When compared with a conventional articulating spindle head, the 5X-410 machining center has a 120° tilting spindle head to achieve five-face/5-axis performance. When combined with a controlled, double-worm gear-driven pallet and extended linear strokes (X, Y, Z), it provides a simultaneous, multi-axis machining. The 5X-410 offers four machining capabilities in one machine.

IMTS Booth S-9463
SB Machine Tools
Schaumburg, IL
www.sbmachinetools.com

Range of Machines
Eight new machines will be exhibited at IMTS. The MU-10000H CNC is the largest of the MU range of 5-axis horizontal high-speed machining centers. It has a maximum workpiece weight capacity of 5,500 lb and workpiece size capacity of 59.05" x 44.29".

The LT3000-EX offers three turrets and a balanced main and right spindle. The LU3000-EX live tooling technology where the tooling is bolted to the turret for optimum support and power engagement.

The MB-10000H is the company’s largest horizontal machining center. The VTM-1200YB 5-axis control vertical multitasking machine enables turning of large, complex-shaped parts and process-intensive machining with 5-axis multitasking.

The Millac-33TU features a 2-axis rotary table and Thinc-OSP control. The Multus B200II, is a multi-function machine that is designed to reduce set-up time by virtually eliminating repetitive fixture. The Multus B750W features Thinc-OSP control, collision avoidance system, and thermo-friendly concept.

IMTS Booth S-8500
Okuma America Corp.
Charlotte, NC
www.okuma.com/home.html

CNC Turning Centers
The GS 42MS and GS 51MS small-frame machines are designed for small- to medium-size workpieces and can address complex parts resulting in increased throughput and reduced cycle time in a single setup. The GS 42MS comes with an A2-5", 6,000rpm main spindle, while the GS 51MS offers a larger A2-6", 5,000rpm main spindle. Each model is equipped with an A2-5, 6,000rpm sub-spindle.

IMTS Booth S-8148
Hardinge Inc.
Elmira, NY
www.hardingeus.com

Mills and Lathes
The Trak line of mills and lathes feature ProtoTRAK CNC technology, a CNC conversational language that reduces time-consuming machine set-ups, enables lower skill-level machinists to do higher-level work, and simplifies the jobs of skilled machinists. The line of Trak products includes: Trak bed mills, knee mills, lathes, and retrofit products; as well as the Trak LPM machining centers, which also features ProtoTRAK CNC technology.

IMTS Booth S-8032
Southwestern Industries Inc.
Rancho Dominguez, CA
www.southwesternindustries.com

Horizontal Machining Center
The G550T horizontal machining center can simultaneously machine parts in five axes as well as turn them by operating in the A-axis and B-axis while turning parts at 800rpm. The machine’s horizontal spindle design provides access to the workpiece on all faces including the inside of hollow parts. The three linear and two rotary axes permit five-sided machining as well as 5-axis simultaneous interpolation. Machining strokes are 31.4" (800mm) in the X-axis, 37.4 (950mm) in the Y-axis, and 40.1" (1,020mm) in the Z-axis. The table has maximum rotation of 240° in the A and 360° in the B-axis. The table is driven by a torque motor for the turning feature and linear glass scales are provided on all axes.

IMTS Booth S-9490
Grob Systems Inc.
Bluffton, OH
www.grobgroup.com/

Small Footprint Y-Axis Turning Center
The Haas ST-10Y is a small-footprint Y-axis turning center that provides 4" of Y-axis travel (±2" from the centerline) for off-center milling, drilling, and tapping, and comes standard with high-torque live tooling and a servo-driven C-axis for versatile 4-axis capability.

The ST-10Y provides a maximum cutting capacity of 9" x 14", with a swing of 16.25" over the cross slide. It is equipped with a 6.5" hydraulic 3-jaw chuck and a 12-station VDI turret. The ST-10Y’s A2-5 spindle nose has a 2.31" spindle bore and a bar capacity of 1.75". The machine’s 15hp vector dual-drive spindle turns to 6,000rpm, and provides 75ft/lb of torque. On-the-fly wye-delta switching yields a wide constant-horsepower band for constant surface feed cuts, and rapids are 945ipm on the X-axis, 1,200ipm on the Z-axis, and 500ipm on the Y-axis to reduce cycle times.

Standard equipment on the ST-10Y includes high-torque live tooling with C-axis, rigid tapping, spindle orientation, a 15" color LCD monitor, and a USB port. Available high-productivity options include a belt-type chip conveyor, a manual tailstock with hydraulic quill, an automatic tool probe, an automatic parts catcher, high-pressure coolant systems, and much more.

IMTS Booth S-8119
Haas Automation Inc.
Oxnard, CA
www.haascnc.com

Range Of Machines Displayed At Show
Showcasing more than 40 machines in 32,000+ft2, the DMG / Mori Seiki booth will be offer seven technology centers including: horizontal turning; horizontal machining; 5-axis machining centers; Ecoline machines; advanced technologies (Ultrasonic and Lasertec); turn-mill machines; and Milltap solutions. Machines on exhibit include the NLX4000AY/750 CNC lathe, DMU 80 eVo linear CNC universal milling machine, and the Milltap 700 machining center. Other machines will include the Ultrasonic 20 PrecisionTool, a selection of automatic lathes, and the DMF 260 linear traveling column machine.

IMTS Booth S-8900
DMG / Mori Seiki USA
Hoffman Estates, IL
http://us.dmgmori.com/

Swiss-Type Lathes
The Tsugami B0 Series includes the B0326 32mm 6-axis Swiss-type lathe that can be converted from direct-drive guide bushing bar-fed operation to a non-guide bushing operation when fitted with an optional chucker kit. Suitable for short or prismatic parts, the machine is equipped with modular live tooling for quick changeovers. A dual-path Fanuc 32i-B CNC allows simultaneous operation of the main- and sub-spindle. The company will feature live cutting demonstrations and show how the opposed gang-tool-type Swiss-style lathes reduce part handling and cutting time.

IMTS Booth S-9410
Tsugami – REM Sales
Windsor, CT
www.imts.remsales.com

CNC Swiss-Type Lathe
The seven-axis Model XD20M CNC Swiss-type lathe features a synchronized guide bushing with bar capacity up to 20mm diameter (0.750”). The machine has a 10,000rpm, five horsepower spindle. Seven milling/drilling live tool units are standard for more complex machining on medical parts. Five of the revolving tool units are located on the main cross slide and two are located at the four-postion back working station. The machine’s sub spindle motion is by independent X2 and Z2 axis, advancing it toward the main spindle for parts transfer at part cutoff and front facing drilling. Two fixed ER-16 front facing I. D. tool stations ride with the sub spindle. T

IMTS Booth S-9482
Hanwha Machinery America
Franklin, WI
www.hanwhamachinery.com

Integrated Chiller and Coolant System
The S2 integrated chiller and high-pressure coolant system was developed for the metal cutting industry, accommodating the growing need for high-pressure, stabilized coolant to help maintain the tight tolerances of many parts. Real-time monitoring is managed by the unit’s PLC (Programmable Logic Controller). The PLC directs the S2 to respond to changing conditions, such as air and tank temperatures and the outgoing coolant temperatures from the machine tool. The compact system stabilizes coolant to ±1° of ambient temperature.

IMTS Booth S-9410
MP Systems High-Pressure
Coolant Systems
E. Granby, CT
www.mp-systems.net

Motorized Spindle Manufacturing
Kessler USA is being introduced to the North American market at IMTS 2012. Franz Kessler, a manufacturer of high-speed motorized spindles, operates their North American Kessler sales and service center to support OEMs and their customers in the North American Market. The facility is equipped with testing equipment designed to rebuild all their spindles, spindle motors, and rotary tables to original condition.

IMTS Booth S-8966
Kessler USA
Plymouth, MI
www.kessler-usa.com

CNC Machining
The VMX42SRT 5-axis machining center has a direct-drive C-axis rotary table. Its swivel head/rotary table design features a flush rotary table that is embedded for maximum manufacturing flexibility and a larger work cube. For 5-axis parts, the embedded table supports taller parts due to more than 3.5" additional in Z. For three-axis work, the increased table size supports parts up to 42" x 24". Basic specifications include X, Y, Z travels of 42", 24", 24", a 12,000 spindle standard, a 40-station swing-arm automatic tool changer, X/Y/Z rapids of 1,378ipm, 1,378ipm, 1,181ipm, and an integrated control that includes both conversational and NC programming modes. UltiMotion technology for 5-axis machining centers simultaneously improves surface finish quality and reduces cycle time by as much as 30% to 40%.

IMTS Booth S-8640
Hurco Companies Inc.
Indianapolis, IN
www.hurco.com

Manufacturing System
The FPC 3000 is a single-level flexible manufacturing system. The standard FPC 3000 will be shown with a load station and six pallet positions, but can extend with up to 18 pallet positions. The Fastems FPC 3000 will be shown integrated with Kitamura’s HX800iL horizontal machining center at IMTS.

IMTS Booth S-9148
Fastems LLC
West Chester, OH
www.fastems.com